A/T Fluid Cooler Hoses Replacement - Suzuki Swift Sport 2004 Service & Repair Manual

5A-104 Automatic Transmission/Transaxle:
4) Apply grease to new differential side oil seal lips.
: Grease 99000–25030 (SUZUKI Super Grease C)
5) Install new differential side oil seals (1) by using
special tool.
Special tool
(C): 09944–88220
(D): 09924–74510
Differential side oil seal installing depth
Right side "a": 2.6 – 3.6 mm (0.10 – 0.14 in.)
Left side "b": 3.8 – 4.8 mm (0.15 – 0.19 in.)
[A]: Right side
6) Install drive shaft referring to "Front Drive Shaft
Assembly Removal and Installation in Section 3A".
7) Pour A/T fluid referring to "A/T Fluid Change".
I2RH0B510068-01
[B]: Left side

A/T Fluid Cooler Hoses Replacement

The rubber hoses for the A/T fluid cooler should be
checked at specified interval. If replacing them, be sure
to note the following.
• to replace clamps at the same time
• to insert hose as far as its limit mark
• to clamp clamps securely
1. Inlet hose (Outlet from A/T fluid cooler)
2. Outlet hose (Inlet to A/T fluid cooler)
S7RS0B5106029
2
1
I4RS0A510057-01