5A-122 Automatic Transmission/Transaxle:
Oil Pump Assembly Disassembly and
Reassembly
Disassembly
1) Remove O-ring from pump body.
2) Remove 8 oil pump subassembly bolts (1) and stator
shaft assembly (2).
3) Remove oil seal (1) using special tool.
Special tool
(A): 09913–50121
2. Oil pump body
Reassembly
1) Install new oil pump body oil seal (1).
Use special tool and hammer to install it, and then
apply grease to its lip portion.
Special tool
(A): 09913–85210
"A": Grease 99000–25030 (SUZUKI Super
Grease C)
2. Oil pump body
2) Install driven gear and drive gear to oil pump body
S7RS0B5106035
3) Install stator shaft assembly to oil pump body and
2
1
I4RS0A510041-01
4) After applying A/T fluid to new O-ring, install it to oil
5) Check drive gear for smooth rotation by using torque
I2RH0B510150-01
Oil Pump Assembly Inspection
1) Check body clearance of driven gear (1).
I2RH0B510151-01
after applying A/T fluid.
tighten 8 pump subassembly bolts (1) to
specification.
Tightening torque
Oil pump subassembly bolt (a): 10 N·m (1.0 kgf-
m, 7.5 lb-ft)
pump body.
converter (1).
Push driven gear to one side of oil pump body (2).
Using a feeler gauge, measure clearance between
driven gear and body. If clearance exceeds its
standard value, replace oil pump assembly.
Clearance between oil pump driven gear and oil
pump body
Standard: 0.10 – 0.17 mm (0.0039 – 0.0067 in.)
1, (a)
I4RS0A510042-01
1
I4RS0A510043-01
S7RS0B5106036
I2RH0B510154-01