Suzuki Swift Sport 2004 Service & Repair Manual page 442

2B-9 Front Suspension:
8) Loosen strut bracket nuts (1).
9) Remove ball joint bolt (3) and nut (4).
10) Remove strut bracket bolts from strut bracket and
then steering knuckle (2).
F: Vehicle front
11) Uncaulk and remove dust cover (1).
12) Remove circlip from steering knuckle.
13) Using hydraulic press (1) and special tool, remove
wheel bearing.
Special tool
(A): 09913-75520
CAUTION
!
When installing wheel bearing, replace it with
new one.
14) Remove wheel bearing outside inner race (1).
Special tool
(C): 09913-65810
(D): 09913–85230
15) Remove hub bolts (1) with copper hammer or
I4RS0B220013-01
hydraulic press.
CAUTION
!
Never remove bolt unless replacement is
necessary.
Be sure to use a new bolt for replacement.
I2RH01220032-01
Installation
For installation, reverse removal procedure, noting the
following instructions.
1) Insert new hub bolt (1) in hub hole. Rotate hub bolt
slowly to assure that serrations are aligned with
those made by original bolt.
I2RH01220033-01
1
I6RS0C220004-01
1
I6RS0C220008-01
I6RS0C220009-01