Charging System Specifications
Battery
Battery
: 48AH/20H, 40.6AH/5H 12 V
Nominal output
Rated capacity
Cold cranking amperes
Generator
Type
Rated voltage
Nominal output
Permissible max. speed
No-load speed
Regulated voltage
Exposed brush length
Permissible ambient temperature
Polarity
Rotation
Tightening Torque Specifications
Fastening part
Generator bracket bolt
Generator pivot bolt
Generator adjusting bolt
NOTE
The specified tightening torque is also described in the following.
"Generator Unit Components"
"Generator Components"
Reference:
For the tightening torque of fastener not specified in this section, refer to "Fasteners Information in Section 0A".
Specifications
14.2 – 14.8 V at 25 °C (77 °F)
Standard: 16 mm (0.63 in.)
Limit: 5.0 mm (0.02 in.)
–30 to 100 °C (–22 to 212 °F)
Clockwise viewed from pulley side
Tightening torque
N⋅m
kgf-m
25
2.5
50
5.0
7
0.7
Charging System:
12 V
48 Ah/20 h
40.6 Ah/5 h
300 A (DIN)
80A type
12 V
80A
18,000 r/min.
1200 r/min. (rpm)
Negative ground
lb-ft
18.0
36.0
by the specified
5.0
procedure.
1J-13
S7RS0B1A07001
S7RS0B1A07002
Note