Downloading Waypoints & Routes To Other Devices; Rnn - Routes - Leica MX400 Operating Instructions Manual

Waypoint
Downloading Waypoints & Routes To Other Devices
Refer to the Installation & Service Manual for hardware interfacing
guidelines.
The receiver can download all of your stored waypoints and routes,
and your active route to other NMEA 0183 devices which accept
the RTE, Rnn, and WPL data sentences. These sentences are
controlled in the CFG1 NMEA Out screens for the identifier given
below. The receiver outputs these sentences in the following
format:

Rnn - Routes:

Waypoint identifiers, listed in order with starting waypoint first, for
route number "nn". The active route in the receiver is always route
zero, but in the Rnn sentence the route number can be transmitted
as either route 00 or 01.
Rnn is NMEA version 1.5. Use of GPRTE is recommended to
comply with NMEA version 2.1.
field#: 1 2 3 4
³ ³ ³ ³
4 5 6
$GPRnn,cccc,cccc,cccc,.....,cccc,cccc*hh<CR><LF>
explanation / actual use:
1: nn = active route number, 00 or 01
can be set to 00 or 01 (default 00).
2 - 15: 14 field sequence of route waypoint IDs.
16: Checksum
Version 3.3
1 1 1
Operator's Manual
63