Display:connect - Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual

35
Obsolete and Discontinued Commands

:DISPlay:CONNect

(see page 1138)
Command Syntax
:DISPlay:CONNect <connect>
<connect> ::= {{ 1 | ON} | {0 | OFF}}
The :DISPlay:CONNect command turns vectors on and off. When vectors
are turned on, the oscilloscope displays lines connecting sampled data
points. When vectors are turned off, only the sampled data is displayed.
The :DISPlay:CONNEct command is an obsolete command provided for compatibility to
N O T E
previous oscilloscopes. Use the :DISPlay:VECTors command (see page 308) instead.
Query Syntax
:DISPlay:CONNect?
The :DISPlay:CONNect? query returns the current state of the vectors
setting.
Return Format
<connect><NL>
<connect> ::= {1 | 0}
See Also • ":DISPlay:VECTors" on page 308
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 1055