Hardcopy:igcolors - Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual

35
Obsolete and Discontinued Commands

:HARDcopy:IGColors

Command Syntax
:HARDcopy:IGColors <value>
<value> ::= {{OFF | 0} | {ON | 1}}
The HARDcopy:IGColors command controls whether the graticule colors
are inverted or not.
The :HARDcopy:IGColors command is an obsolete command provided for compatibility to
N O T E
previous oscilloscopes. Use the :HARDcopy:INKSaver (see
Query Syntax
:HARDcopy:IGColors?
The :HARDcopy:IGColors? query returns a flag indicating whether graticule
colors are inverted or not.
Return Format
<value><NL>
<value> ::= {0 | 1}
See Also
•
1064
(see page 1138)
"Introduction to :HARDcopy Commands"
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
page 363) command instead.
on page 358