Power:transient:apply - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

25
:POWer Commands

:POWer:TRANsient:APPLy

Command Syntax
:POWer:TRANsient:APPLy
The :POWer:TRANsient:APPLy command applies the transient analysis
using the initial current and new current settings.
See Also •
•
•
•
•
608
(see page 1208)
":POWer:TRANsient:EXIT"
":POWer:TRANsient:IINitial"
":POWer:TRANsient:INEW"
":POWer:TRANsient:NEXT"
":MEASure:TRESponse"
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
on page 609
on page 610
on page 611
on page 612
on page 505