35
Obsolete and Discontinued Commands
:MTESt:TRIGger:SOURce
(see
page
1138)
Command Syntax
:MTESt:TRIGger:SOURce <source>
<source> ::= CHANnel<n>
<n> ::= 1 to (# analog channels) in NR1 format
The :MTESt:TRIGger:SOURce command sets the channel to use as the
trigger.
The :MTESt:TRIGger:SOURce command is obsolete and is provided for backward
N O T E
compatibility to previous oscilloscopes. Use the trigger source commands (see
page
877)
instead.
Query Syntax
:MTESt:TRIGger:SOURce?
The :MTESt:TRIGger:SOURce? query returns the currently selected trigger
source.
Return Format
<source> ::= CHAN<n>
<n> ::= 1 to (# analog channels) in NR1 format
See Also
•
"Introduction to :MTESt Commands"
on page 491
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
1087