Igmp-Snooping Max-Response-Time - 3Com 5500G-EI Command Reference Manual

240 C 7: U M
HAPTER SING
igmp-snooping
max-response-time
P C
ULTICAST ROTOCOL OMMANDS
undo igmp-snooping host-aging-time
View
System View
Parameter
Specifies the port aging time of the multicast group member, ranging
seconds
:
from 200 to 1000 and measured in seconds. The default is 260.
Description
Use the
igmp-snooping host-aging-time
time of the multicast group members.
Use the
undo igmp-snooping host-aging-time
value.
This command sets the aging time of the multicast group member so that the
refresh frequency can be controlled. When the group members change frequently,
the aging time should be comparatively short, and vice versa.
Related command:
Example
Set the aging time to 300 seconds.
<SW5500>system-view
System View: return to User View with Ctrl+Z
[SW5500]igmp-snooping host-aging-time 300
Syntax

igmp-snooping max-response-time

undo igmp-snooping max-response-time
View
System View
Parameter
Maximum response time for a query ranging from 1 to 25 and
seconds :
measured in seconds. The default is 10.
Description
Use the
igmp-snooping max-response-time
maximum response time for a query.
Use the
undo igmp-snooping max-response-time
default value.
The set maximum response time decides the time limit for the Switch to respond
to IGMP Snooping general query packets.
Related commands:
.
igmp-snooping
seconds
,
igmp-snooping igmp-snooping router-aging-time
command to configure the port aging
command to restore the default
command to configure the
command to restore the
.