Avaya S8100 Series Manual page 97

Checking for translation corruption
●
Backing up recovery system files
●
Logging off all administration applications
●
Registering Avaya Communication Manager
●
Preupgrade tasks
Upgrading the SAMP firmware (S8500B only)
Before you upgrade the S8500B Media Server to Communication Manager R3.1, upgrade the
firmware on the Avaya Server Availability Management Processor (SAMP) card. Check the
Downloads section at
S8500 Media Server and SAMP.
For more information, see Using the Avaya Server Availability Management Processor (SAMP),
03-300322.
Connecting to the media server
Perform one of the following options:
If you are on site, connect to the services port on the back of the media server.
●
If you are off site, use the IP address of the media server to log on to the media server.
●
Stopping call processing on the LSPs or ESSs if being used (main
server only)
This procedure is optional. To stop Communication Manager on an LSP or ESS:
1. Connect to the services port (2) on the back of the main media server (primary controller).
2. Access the command line interface of the server using telnet and an IP address of
192.11.13.6.
on page 116
on page 116
http://support.avaya.com
on page 118
on page 118
for the most recent firmware available for the
Preupgrade tasks
Issue 2.1 June 2006 97