3 Specifications
3-5-4
Connector Specifications
Control I/O Connector (R88A-CNU11C)
This connector is connected to the Servo Drive's control I/O connector (CN1).
Use this connector when preparing a control cable by yourself.
For wiring methods, refer to Control Cable Specifications on page 3-84.
This connector is soldered.
External Dimensions
39
t = 18
Encoder Connectors
These connectors are used for encoder cables.
Use them when preparing an encoder cable by yourself.
For wiring methods, refer to Encoder Cable Specifications on page 3-64.
External Dimensions
R88A-CNW01R (Drive's CN2 side)
This connector is soldered.
t = 12
3 - 80
Connector plug model
10150-3000PE (Sumitomo 3M)
Connector case model
10350-52A0-008 (Sumitomo 3M)
43.5
Connector plug model
55100-0670 (Molex Japan)
OMNUC G5-series (Pulse-train Input Type) AC Servomotors and Servo Drives User's Manual