Omron G5 Series User Manual page 253

Radio Noise Filter and Emission Noise Prevention Clamp Core
Use one of the following filters to prevent switching noise of PWM of the Servo Drive and to prevent
noise emitted from the internal clock circuit.
Model
*1
3G3AX-ZCL1
*2
3G3AX-ZCL2
*3
ESD-R-47B
*4
ZCAT3035-1330
RJ8035
RJ8095
T400-61D
*1 Generally used for 1.5 kW or higher.
*2 Generally used for 1.5 kW or lower. The maximum number of windings is 3 turns.
*3 Generally used for 50/100 W. The maximum number of windings is 2 turns.
*4 Also used on the Drive output power lines to comply with the EMC Directives. Only a clamp is used. This clamp
can also be used to reduce noise current on a FG line.
OMNUC G5-series (Pulse-train Input Type) AC Servomotors and Servo Drives User's Manual
Manufacturer
OMRON For Drive output and power cable
OMRON For Drive output and power cable
NEC TOKIN For Drive output and power cable
TDK For Encoder cable and I/O cable
Konno Industry For power supply line
Konno Industry For power supply line
MICROMETALS For Drive output and power cable
4 System Design
Application
4
4 - 29