Omron G5 Series User Manual page 395

Pn633 Reserved
Setting 1,000
range
• Do not set.
Pn634 Reserved
Setting 0
range
• Do not set.
Pn635 Reserved
Setting 10
range
• Do not set.
Pn637
Vibration Detection Threshold
Setting 0 to 1,000
range
• Set the vibration detection threshold.
• If torque vibration that exceeds this setting is detected, a vibration detection warning occurs.
• The unit is 0.1% of the rated torque.
Pn638 Warning Mask Setting
Setting –32,768 to 32,767
range
• Set a mask for warning detection.
• If you set the corresponding bit to 1, the corresponding warning detection is disabled.
• For the setting method, refer to 10-2 Warning List on page 10-5.
Precautions for Correct Use Precautions for Correct Use
Pn700 to Pn799 and Pn800 to Pn899 are not used. Do not change the settings.
OMNUC G5-series (Pulse-train Input Type) AC Servomotors and Servo Drives User's Manual
Unit –
Unit –
Unit –
Unit 0.1%
Unit –
7 Parameter Details
Default 1,000 Cycle the
setting power supply
Default 0 Cycle the
setting power supply
Default 10 Cycle the
setting power supply
Default 0 Cycle the
setting power supply
Default 4 Cycle the
setting power supply
–
–
–
All
–
All
Required
7
7 - 61