Omron G5 Series User Manual page 316

6 Applied Functions
Parameters That can be Allocated
Use the following parameters when changing the input signal allocations.
For the setting method, refer to Input Signal Allocation Method on page 6-34.
Parameter
No.
Pn400 Input Signal Selection 1
Pn401 Input Signal Selection 2
Pn402 Input Signal Selection 3
Pn403 Input Signal Selection 4
Pn404 Input Signal Selection 5
Pn405 Input Signal Selection 6
Pn406 Input Signal Selection 7
Pn407 Input Signal Selection 8
Pn408 Input Signal Selection 9
Pn409 Input Signal Selection 10
Input Signal Allocation Method
Input the setting in each control mode to any of the parameters from Pn400 to Pn409 to allocate the
signal.
These parameters must be set in hexadecimal notation.
Set the set value of the function for each control mode in "**" below.
Refer to the function number table provided below for the set value of each function. The logic setting is
included in the function number.
0000
For parameters reserved for the system, do not change the values.
Example:
Position control: Electronic Gear Switching input 1 with NO (normally open) contacts (0C hex)
Speed control: Internally Set Speed Selection 1 with NC (normally close) contacts (8E hex)
00008E0Ch
The set value on the front panel is indicated as a decimal, which is 36,364 in this case.
6 - 34
Name
Set the SI1 input function allocation. This
parameter must be set in hexadecimal notation.
(The display on the front panel is indicated as a
decimal.)
Set the SI2 input function allocation.
Set the SI3 input function allocation.
Set the SI4 input function allocation.
Set the SI5 input function allocation.
Set the SI6 input function allocation.
Set the SI7 input function allocation.
Set the SI8 input function allocation.
Set the SI9 input function allocation.
Set the SI10 input function allocation.
h
****
Position control
Speed control
Position control
Speed control
OMNUC G5-series (Pulse-train Input Type) AC Servomotors and Servo Drives User's Manual
Description Reference
P.7-32
P.7-32
P.7-32
P.7-32
P.7-32
P.7-32
P.7-32
P.7-32
P.7-32
P.7-32