Omron G5 Series User Manual page 375

Pn439 Brake Release Speed Setting
Setting 30 to 3,000
range
Pn440
Warning Output Selection 1
Setting 0 to 10
range
Explanation of Set Values
Set value
0 OR output for all types of warnings
1 Overload warning
2 Excessive regeneration warning
3 Battery warning
4 Fan warning
5 Encoder communications warning
6 Encoder overheating warning
7 Vibration detection warning
8 Service life detection warning
9 Reserved (Do not set.)
10 Reserved (Do not set.)
• For the setting method, refer also to 10-2 Warning List on page 10-5.
Pn441
Warning Output Selection 2
Setting 0 to 10
range
• For this parameter, set the same value as for Warning Output Selection 1 (Pn440).
Pn442
Positioning Completion Range 2
Setting 0 to 262,144
range
• Set the positioning completion range.
• For this parameter, set the same value as for Positioning Completion Range 1 (Pn431).
OMNUC G5-series (Pulse-train Input Type) AC Servomotors and Servo Drives User's Manual
Unit
Pn438 set value
Released (ON)
*1
t1
Motor rotation speed
Pn439 set value
Pn438 set
value
Released (ON)
*1
t1
Motor rotation speed
Pn439 set value
Unit
Unit
Unit Command units
r/min Default
setting
Applied (OFF)
When the set time in Pn438
comes earlier.
Applied (OFF)
When the time to reach the set
value or less in Pn439 comes earlier.
– Default
setting
Description
– Default
setting
Default
setting
7 Parameter Details
All
30 Cycle the –
power supply
All
0 Cycle the –
power supply
All
0 Cycle the –
power supply
Position
10 Cycle the –
power supply
7 - 41
7