Omron G5 Series User Manual page 422

8 Operation
6
Save the changed setting to memory.
Key
operation
7
Return to the parameter write mode display.
Key
operation
8
Turn OFF and then ON the power supply again.
Precautions for Correct Use Precautions for Correct Use
• Items which are limited vary depending on the mode setting.
• If the Front Panel Parameter Write Selection (Pn617) is set to 1, the parameter set value is
automatically written to EEPROM when changed.
• For details about the front panel lock function, refer to Front Key Protection Setting (Pn535) in
7-6 Extended Parameters on page 7-42.
8 - 26
Display example
Press
Press
Press and hold
The number of dashes on the display increases.
The parameter write process starts. (This display appears only
momentarily.)
This indicates a normal completion. Other than this, the follwing displays
may be shown
the changed parameters are enabled only after the system is restarted.
Turn OFF and then ON the power supply again.
Display example
Press
OMNUC G5-series (Pulse-train Input Type) AC Servomotors and Servo Drives User's Manual
Description
key to switch to the parameter write mode display.
key to switch to the parameter write mode display.
key for 5 seconds or more (until
and
also indicates a normal completion, but it means that some of
indicates a write alarm. Write the data again.
Description
key to return to the parameter write mode display.
appears).
.