Changing The Positions Of The Guide Holder Fixing Screws; Method For Changing The Positions Of The Guide Holder Fixing Screws - Agilent Technologies 16197A Operation And Service Manual

Installation Guide

Changing the Positions of the Guide Holder Fixing Screws

Changing the Positions of the Guide Holder Fixing Screws
If the guide holder fixing screws hamper operation, the positions of these screws can be
changed.
Figure 1-6 Positions of the Guide Holder Fixing Screws

Method for Changing the Positions of the Guide Holder Fixing Screws

Before changing the positions of the fixing screws, remove the pressure unit.
Step 1. Remove the four screws that fix the guide holder flange (Figure 1-7).
Step 2. Rotate the guide holder by 90 degrees together with the components fixed on the flange,
and again set the guide holder in place (Figure 1-7).
16 Chapter 1