Waveform Generator - Agilent Technologies InfiniiVision 3000 User Manual

16

Waveform Generator

2 In the Waveform Generator Menu, press the Waveform softkey and turn
3 Depending on the selected waveform type, use the remaining softkeys
Waveform Characteristics
Type
Arbitrary Use the Frequency/Frequency
Fine/Period/Period Fine, Amplitude/High-Level,
and Offset/Low-Level softkeys to set the arbitrary
waveform signal parameters.
Use the Edit Waveform softkey to define the
arbitrary waveform shape. See
waveforms"
Sine Use the Frequency/Frequency
Fine/Period/Period Fine, Amplitude/High-Level,
and Offset/Low-Level softkeys to set the sine
signal parameters.
252
The waveform generator output is automatically disabled if excessive
voltage is applied to the Gen Out BNC.
the Entry knob to select the waveform type.
and the Entry knob to set the waveform's characteristics.
"To edit arbitrary
on page 255.
Frequency
Range
100 mHz to
12 MHz
100 mHz to
20 MHz
Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide
Max. Offset
Amplitude (High-Z)
1
(High-Z)
20 mVpp to ±2.50 V
5 Vpp
20 mVpp to ±2.50 V
5 Vpp
1