Table of Contents
Advertisement
Description:
HOW TO:
Results
Saving Graphs Results
Saving Graphs Results
ProBER 2 can graphically present the following results:
• Correlation of error, jitter and alarm results
• Display of error, jitter and alarm results versus time
• Overview of the results which can be stored in the instrument for record keeping.
Up to 10 sets of measurement results can be stored in ProBER 2.
1 Choose
,
MENU
you can access this display before, during or after performing a measurement.
2 When the measurement is complete, move the cursor to Store and choose
. Note that when the measurement is in progress, the Store field
Select Store
shows
CURRENT
complete, as shown.
3 Use
and
to access the instrument store in which you wish to store the
graph results. Stores 1 to 9 are available.
4 Choose
to confirm the saving of the graph results obtained from the "last"
Save
measurement.
Choose
to exit without saving the graph results.
Cancel
Choose
to view the graph results from the selected store.
ENTER
Choose
to clear the contents of the selected store.
Delete
7-2
,
to obtain the graphs results display. Note,
More
Graphs
and changes to
EMPTY
when the measurement is
Advertisement
Table of Contents
