Chapter 4: Ethernet module configuration
Configure an Ethernet port to ensure proper operation and optimum performance of the port.
•
Enabling a module
•
Disabling a module
•
Configuring an Ethernet port
•
Associating a port to a VRF instance
Enabling a module
Enable an Ethernet module to allow traffic to flow through it.
1. In the Device Physical View tab, select a module.
2. In the navigation tree, open the following folders: Configuration > Edit.
3. Click Card.
4. Select up in the AdminStatus field.
5. Select the power priority in the PowerManagementPriority field.
6. Click Apply.
Card field descriptions
Use the data in the following table to use the Card tab.
CardType
CardDescription
CardSerialNo
CardPartNo
Configuration — Ethernet Modules
using EDM
on page 19
on page 20
on page 21
on page 23
Name
Description
The card type.
A description of the card.
The card serial number.
The card part number.
June 2011
19