MLT and SMLT link aggregation configuration using Enterprise Device Manager
8. In the SessionEnable box, select one of the following:
9. Click Apply.
Enabling SMLT Interoperability with MSTP using EDM
Use the following procedure to enable SMLT Interoperability for MSTP.
Prerequisites
• Configure your switch to MSTP mode
• Configure an IST MLT on your switch
Procedure steps
1. From the Configuration tree, click VLAN.
2. From the VLAN tree, click MLT/LACP.
3. Click the MultiLink/LACP Trunks tab.
4. From the list, click an IST MLT.
5. On the toolbar, click the IstMlt button.
6. In the StpEnable box, click the enable button.
7. On the toolbar, click Apply.
Disabling SMLT Interoperability with MSTP using EDM
Use the following procedure to disable SMLT Interoperability for MSTP.
76
Configuration — Link Aggregation, MLT, and SMLT
• enable
• disable
The IST MLT dialog box closes and the changes are applied.
Comments? infodev@avaya.com
January 2012