Main Menu
Component Locations
Index
NOTE:
• If an intact airbag assembly has been removed from a scrapped car or has been found defective or damaged during transit,
storage or service, it should be deployed (see
• Before removing the gearbox, remove the ignition key to lock the steering shaft.
• After installing the gearbox, check the wheel alignment and adjust if necessary.
Table of Contents
section
24).
STEERING GEARBOX
Removal/Installation, page
17-55
Illustrated Index, page
17-59
Pinion Preload Inspection, page
Rack Guide Screw Adjustment, page
EPS CONTROL UNIT
Replacement, page
STEERING COLUMN
Removal, page
17-49
Inspection, page
17-51
Installation, page
17-52
17-60
17-60
17-64
STEERING WHEEL/
AIRBAG ASSEMBLY
Removal, page
17-45
Disassembly, page
17-46
Installation, page
17-47