ATM Module Commands
The Cisco IOS software commands in this section are specific to the ATM module.
atm bind
Use the atm bind interface configuration command to bind a PVC to a VLAN. Use the no
form of this command to remove the bind.
atm bind pvc vlan vc_no vlan_id
no atm bind pvc vlan vc_no vlan_id
Syntax Description
vc_no
vlan_id
Default
None
Command Mode
Interface configuration
Usage Guideline
You can bind any number of PVCs to the same VLAN. To prevent loops, ensure that each
PVC uniquely connects a VLAN group between two Catalyst 2900 series switches.
Virtual circuit descriptor, a unique number for each switch that
identifies which virtual path identifier/virtual channel identifier
(VPI/VCI) to use for a particular packet.
Number of the VLAN.
Command Reference B-9