Dhcpv6 Commands; Clear Ipv6 Dhcp Client - Cisco Sx350 Cli Manual

DHCPv6 Commands

Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
14.0

14.1 clear ipv6 dhcp client

To restart DHCP for an IPv6 client on an interface, use the clear ipv6 dhcp client
command in Privileged EXEC mode.
Syntax
clear ipv6 dhcp client
Parameters
•
interface-id
—Interface identifier.
Default Configuration
N/A
Command Mode
Privileged EXEC mode
User Guidelines
This command restarts DHCP for an IPv6 client on a specified interface after first
releasing and unconfiguring previously-acquired prefixes and other configuration
options (for example, Domain Name System [DNS] servers).
Example
The following example restarts the DHCP for IPv6 client on VLAN 100:
switchxxxxxx# clear ipv6 dhcp client vlan 100
interface-id
14
348