Show Ip Dhcp Snooping - Cisco Nexus 5500 Series Command Reference Manual

Chapter Show Commands

show ip dhcp snooping

To display general status information for Dynamic Host Configuration Protocol (DHCP) snooping, use
the show ip dhcp snooping command.
Syntax Description This command has no arguments or keywords.
Command Default
None
Command Modes
Any command mode
Command History Release
5.2(1)N2(1)
Examples
This example shows how to display general status information about DHCP snooping:
switch# show ip dhcp snooping
DHCP snooping service is enabled
Switch DHCP snooping is enabled
DHCP snooping is configured on the following VLANs:
1,13
DHCP snooping is operational on the following VLANs:
1
Insertion of Option 82 is disabled
Verification of MAC address is enabled
DHCP snooping trust is configured on the following interfaces:
Interface
------------
Ethernet2/3
switch#
Related Commands Command
copy running-config
startup-config
ip dhcp snooping
show ip dhcp snooping
statistics
show running-config
dhcp
OL-27883-02
show ip dhcp snooping
Modification
This command was introduced.
Trusted
-------
Yes
Description
Copies the running configuration to the startup configuration.
Globally enables DHCP snooping on the device.
Displays DHCP snooping statistics.
Displays the DHCP snooping configuration.
Cisco Nexus 5500 Series NX-OS Security Command Reference
show ip dhcp snooping
289