Show Ip Dhcp Snooping Statistics - Cisco Catalyst 3650 series Command Reference Manual

show ip dhcp snooping statistics

show ip dhcp snooping statistics
To display DHCP snooping statistics in summary or detail form, use the show ip dhcp snooping statistics
command in user EXEC mode.
show ip dhcp snooping statistics [detail ]
Syntax Description
detail
Command Modes
User EXEC
Command History
Release
Cisco IOS XE 3.3SECisco IOS XE 3.3SE
Usage Guidelines
In a switch stack, all statistics are generated on the stack master. If a new active switch is elected, the statistics
counters reset.
Examples This is an example of output from the show ip dhcp snooping statistics command:
Device> show ip dhcp snooping statistics
Packets Forwarded
Packets Dropped
Packets Dropped From untrusted ports
This is an example of output from the show ip dhcp snooping statistics detail command:
Device> show ip dhcp snooping statistics detail
Packets Processed by DHCP Snooping
Packets Dropped Because
IDB not known
Queue full
Interface is in errdisabled
Rate limit exceeded
Received on untrusted ports
Nonzero giaddr
Source mac not equal to chaddr
Binding mismatch
Insertion of opt82 fail
Interface Down
Unknown output interface
Reply output port equal to input port
Packet denied by platform
This table shows the DHCP snooping statistics and their descriptions:
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
818
(Optional) Displays detailed statistics information.
Modification
This command was introduced.
= 0
= 0
= 0
= 0
= 0
= 0
= 0
= 0
= 0
= 0
= 0
= 0
= 0
= 0
= 0
= 0
= 0