Show Lldp Med Configuration - Cisco 300 Series Cli Manual

Link Layer Discovery Protocol (LLDP) Commands
OL-32830-01 Command Line Interface Reference Guide
Syntax
show lldp local tlvs-overloading
Parameters
interface-id—(Optional) Specifies a port ID.
Default Configuration
If no port ID is entered, the command displays information for all ports.
Command Mode
User EXEC mode
User Guidelines
The command calculates the overloading status of the current LLDP configuration,
and not for the last LLDP packet that was sent.
Example
switchxxxxxx# show lldp local tlvs-overloading gi11
TLVs Group
------------
Mandatory
LLDP-MED Capabilities
LLDP-MED Location
802.1
Total: 1600 bytes
Left: 100 bytes

30.26 show lldp med configuration

To display the LLDP Media Endpoint Discovery (MED) configuration for all ports or
for a specific port, use the show lldp med configuration Privileged EXEC mode
command.
[interface-id]
Bytes Status
------ --------------
31 Transmitted
9 Transmitted
200 Transmitted
1360 Overloading
30
670