Show Policy-Map Vlan - Cisco Nexus 7000 Series Command Reference Manual

Cisco Nexus 7000 Series NX-OS Quality of Service Commands
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .

show policy-map vlan

To display policy maps for the VLANs, use the show policy-map vlan command.
Syntax Description
vlan-id
input
output
type
qos
queuing
Defaults
None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.0
Usage Guidelines This command does not require a license.
Examples
This example shows how to display policy maps that are assigned to all VLANs:
switch(config)# show policy-map vlan
Global statistics status :
Vlan 1
Service-policy (qos) input:
OL-23378-01
show policy-map vlan [vlan-id] [input | output] [type {qos | queuing}]
(Optional) Policy maps assigned to specified VLAN.
(Optional) Displays policy maps that are assigned to input traffic only.
(Optional) Displays policy maps that are assigned to output traffic only.
(Optional) Specifies the component type to display.
Specifies the policy maps of type qos only.
Specifies the policy maps of type queuing only. This keyword is not supported in
Release 4.0.1.
Modification
This command was introduced.
policy statistics status:
Class-map (qos): abc (match-all)
Match: dscp 0-3
set dscp 3
set qos-group 3
Cisco Nexus 7000 Series NX-OS Quality of Service Command Reference, Release 5.x
enabled
abc
enabled
show policy-map vlan
QOS-107