Show Vlan - Cisco Nexus 5500 Series Command Reference Manual

Chapter Show Commands

show vlan

To display VLAN information, use the show vlan command.
Syntax Description
brief
name name
summary
Command Default None
Command Modes EXEC mode
Command History Release
5.2(1)N1(1)
Usage Guidelines This command displays information for all VLANs, including private VLANs, on the switch.
Each access port can belong to only one VLAN. Trunk ports can be on multiple VLANs.
Although a port can be associated with a VLAN as an access VLAN, a native VLAN, or one of the trunk
Note
allowed ports, only access VLANS are shown under Ports in the display.
If you shut down a VLAN using the state suspend or the state active command, these values appear in
the Status field:
•
•
If you shut down a VLAN using the shutdown command, these values appear in the Status field:
•
•
If a VLAN is shut down internally, these values appear in the Status field:
•
•
If a VLAN is shut down locally and internally, the value that is displayed in the Status field is act/ishut
or sus/ishut. If a VLAN is shut down locally only, the value that is displayed in the Status field is
act/lshut or sus/lshut.
OL-27880-02
show vlan [brief | name {name} | summary]
(Optional) Displays only a single line for each VLAN, naming the VLAN,
status, and ports.
(Optional) Displays information about a single VLAN that is identified by
the VLAN name.
(Optional) Displays the number of existing VLANs on the switch.
Modification
This command was introduced.
suspended—VLAN is suspended.
active—VLAN is active.
act/lshut—VLAN status is active but shut down locally.
sus/lshut—VLAN status is suspended but shut down locally.
act/ishut—VLAN status is active but shut down internally.
sus/ishut—VLAN status is suspended but shut down internally.
Cisco Nexus 5500 Series NX-OS Layer 2 Interfaces Command Reference
show vlan
1415