Dell Z9500 Command Reference Manual page 1733

hostname
udp
tcp
Defaults Disabled.
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.5(0.1)
9.5(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
8.4.1.0
7.6.1.0
7.5.1.0
Usage Multiple logging servers of both IPv4 and/or IPv6 can be configured.
Information
Related
logging on
Commands
Syslog server, and terminal lines.
logging trap
Simple Network Management Protocol (SNMP) and Syslog
Enter the name of a host already configured and recognized
by the switch.
Enter the keyword udp to enable transmission of log
message over UDP followed by port number. The default
port is 514
Enter the keyword tcp to enable transmission of log
message over TCP followed by port number.
Description
Added udp and tcp keywords for the Z9500.
Added udp and tcp keywords for the S4810, S4820T,
S6000, Z9000, and MXL.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added support for IPv6.
Introduced on the S-Series.
Introduced on the C-Series.
— enables the logging asynchronously to logging buffer, console,
— enables logging to the Syslog server based on severity.
1733