Snmp-Server Packetsize - Dell Z9500 Command Reference Manual

Version
7.6.1.0
7.5.1.0
Example
Dell(conf)#snmp-server location MAA_LAB
Dell(conf)#do show running-config snmp
!
snmp-server community public ro
snmp-server location MAA_LAB
Related
show running-config
Commands

snmp-server packetsize

Set the largest SNMP packet size permitted. Wen the SNMP server is receiving a request or generating a
reply, use the snmp-server packetsize global configuration command.
Z9500
Syntax
snmp-server packetsize byte-count
Parameters
byte-count
Defaults 8
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
1722
Description
Introduced on the S-Series.
Introduced on the C-Series.
snmp — displays the SNMP running configuration.
Enter one of the following values 8, 16, 24 or 32. Packet sizes
are 8000 bytes, 16000 bytes, 32000 bytes, and 64000 bytes.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Simple Network Management Protocol (SNMP) and Syslog