Brake Pedalposition Switch Test; Side Turn Signal Light Replacement - Honda Civic Service Manual

Exterior Lights
Brake PedalPosition Switch Test
1. Disconnectthe 4P connector (A) from the brake
pedal position switch {B).
Check for continuity between the No. 1 and No. 2
t e r m t n a l s .
. T h e r e s h o u l d b e c o n t i n u i t y w h e n t h e b r a k e p e d a l
rs presseo.
. There should be no continuity when the brake
pedal is released.
Check for continuity between the No. 3 and No. 4
terminals {with cruise control).
T h e r e s h o u l d b e n o c o n t i n u i t y w h e n t h e b r a k e
pedal is pressed.
T h e r e s h o u l d b e c o n t i n u i t y w h e n t h e b r a k e p e d a l
i s r e l e a s e d .
lf necessary, adjust or replace the switch, or adjust
t h e p e d a l h e i g h t ( s e e p a g e 1 9 - 6 ) .
22-84
Side Turn Signal Light Replacement
NOTE: Be careful nol to damage the fender.
1 . P u s h t h e r e t a i n i n g s p r i n g ( A ) . a n d r e m o v e t h e s i d e
t u r n s i g n a l l i g h t ( B ) ,
Side Turn Signal Light: 5 W
2. Disconnect the 2P connector {C) from the light.