Displaying 3D Diagnostic Test Patterns; Verifying 3D Cinema Content - Christie CP2208 User Manual

If this option is not available, define a measured color gamut data file (on page 70).
b) From the Target Color list, select DC28_DCIXYZE_314_351.
c) From the Color Space list, select YCxCz Inverse ICT.
d) From the Gamma list, select Gamma 2.6.
e) From the LUT-CLUT list, select Linear_9x9x9.
5. In the left pane, select 3D Control and edit these settings:
a) From the 3D Sync Input Mode list, select Line Interleave.
b) From the Frame Rate N:M list, select 6:2.
c) From the L/R Display Sequence list, select Left (L1R1 L2R2).
d) From the 3D Sync Polarity list, select True.
e) In the Dark Time field, enter 430 or a value appropriate for your 3D hardware.
f) In the Output Delay field, enter -120 or a value appropriate for your 3D hardware.
g) In the Phase Delay field, enter 0 or a value appropriate for your 3D hardware.

Displaying 3D diagnostic test patterns

You can use 3D test patterns to verify your 3D hardware is functioning correctly.
1. Select Menu > Channel Setup.
2. From the Channel Name list, select a 3D channel.
3. Select 3D Test Patterns.
4. Select a test pattern.
5. Put on a pair of 3D glasses.
6. Look at the on-screen image, and then close your left eye and look at the image through your
right eye. Switch when the image alternates.
3D Test Pattern
RGB-12bit -3D Dynamic Range
RGB-12bit-3D Four Quadrant
RGB-12bit-3D Full White
RGB-12bit-3D Half Descending
RGB-12bit-3D Horizontal Ramp
RGB-12bit-3D L-Pattern

Verifying 3D cinema content

Check the 3D content to verify that it displays correctly.
1. Put on a pair of 3D glasses.
2. Play the 3D content.
3. Verify the left and right eye display correctly.
CP2208 User Guide
020-101916-03 Rev. 1 (12-20120)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Action
Alternates between two images.
Alternates between two images.
Alternates between two 100% white images.
Alternates between four images.
Alternates between two horizontal ramp images.
Alternates between two images.
Viewing 3D content
72