Running A Vga1-In/Ypbpr Connector Port Performance Test; Running A Remote Port Performance Test; Performing A Network Function Test On The Network Port - Christie DHD410S Service Manual

Running a VGA1-In/YPbPr Connector port performance test

To verify the DVI port functionality, conduct a performance test on the DVI port.
ID Part name
1 Test equipment
2 Test signal
3 Inspection item
4 Inspection distance
5 Criteria
To perform th
e VGA1-In/YPbPr Connector port p
1. Connect the projector and video generator using a DVI cable.
2. Switch the signal source to
The image of video generator is projected.

Running a remote port performance test

To verify the remote port functionality, conduct a performance test on the remote port.
ID Part name
1 Test equipment
2 Test signal
3 Inspection item
4 Inspection distance
5 Criteria
To perform the remote port performance test, complete the following steps.
1. Connect the projector and remote controller using an audio cable.
2. On the IR remote, press Menu.
The image of on-screen display menu is projected.
Performing a network function test on the
network port
The following browsers are supported for this test:
• Internet Explorer: version 11 or higher is required.
DHD410S Service Manual
020-001481-01 Rev. 1 (10-2018)
Description
Video generator
General-1, 1024 x 768 @60Hz
VGA1-In/YPbPr Connector port performance test
1.8 to 2.2 m
No abnormal color performance, line distortion, or noise exist on the screen
erformance test, complete the following steps.
.
VGA1
Description
Remote controller
None
Wired remote port performance test
1.8 to 2.2 m
To confirm that it can power on/off the projector, on the remote controller,
press ON.
Service setups
19