Figure 5.8 Dump Device Selection Menu - Fujitsu PRIMEQUEST 2000 Series Installation Manual

CHAPTER 5 Work after Operating System installation
5.3 Setting of sadump
9. Select the disk or the disk partition, and set the disk or the disk partition where the dump device is to be configured.
The dump device selection menu is displayed.
(Data corruption)
When the dump device is selected, reconfirm whether the selection of disk is correct. If the operation is executed with
an incorrect disk selection, data would be corrupted.
Remark
For the ACPI name that shows the disk or the disk partition, see "3.6 Device pass" of PRIMEQUEST 2000 series Tool
Reference (CA92344-0539).
Dump Device Selection Menu
FIGURE 5.8
95
CA92344-0536-01