Clear Rfdetect Ignore - D-Link DWS-1008 Cli Reference Manual
8 port 10/100 wireless switch with power over ethernet
Hide thumbs
Also See for DWS-1008:
- Cli reference manual (531 pages) ,
- Product manual (502 pages) ,
- User manual (454 pages)
Table of Contents
Advertisement
DWS-1008 CLI Reference Guide
clear rfdetect ignore
Removes a device from the ignore list for RF scans. MSS does not generate log messages
or traps for the devices in the ignore list.
Syntax: clear rfdetect ignore mac-addr
mac-addr
Defaults: None.
Access: Enabled.
Examples: The following command removes BSSID aa:bb:cc:11:22:33 from the ignore
DWS-1008# clear rfdetect ignore aa:bb:cc:11:22:33
success: aa:bb:cc:11:22:33 is no longer ignored.
clear rfdetect ssid-list
Removes an SSID from the permitted SSID list.
Syntax: clear rfdetect ssid-list ssid-name
ssid-name
Defaults: None.
Access: Enabled.
Examples: The following command clears SSID mycorp from the permitted SSID list:
DWS-1008# clear rfdetect ssid-list mycorp
success: mycorp is no longer in ssid-list.
clear rfdetect vendor-list
Removes an entry from the permitted vendor list.
Syntax:
client | ap
mac-addr | all
Defaults: None.
Access: Enabled.
D-Link Systems, Inc.
Basic service set identifier (BSSID), which is a
MAC address, of the device to remove from the
ignore list.
list for RF scans:
SSID name you want to remove from the
permitted SSID list.
clear rfdetect vendor-list {client | ap} mac-addr | all
Specifies whether the entry is for an AP brand or
a client brand.
Organizationally Unique Identifier (OUI) to
remove.
RF Detection Commands
337
Advertisement
Table of Contents
