Disabling Historical Performance Collection - Brocade Communications Systems Brocade 8/12c User Manual

Enabling historical performance collection for selected fabrics
To enable historical performance collection for selected fabrics, complete the following steps.
1. Select Monitor > Performance > Historical Data Collection > Enable Selected.
2. Select the fabrics for which you want to collect historical performance data in the Available
3. Click the right arrow to move the selected fabrics to the Selected table.
4. Select the Include newly discovered fabrics check box to automatically add all newly
5. Click OK.

Disabling historical performance collection

To disable historical performance collection on all fabrics, select Monitor > Performance >
Historical Data Collection > Disable All.
Historical performance data collection is disabled for all fabrics in the SAN.
Brocade Network Advisor SAN User Manual
53-1002167-01
The Historical Data Collection dialog box displays.
FIGURE 345
Historical Data Collection dialog box
table.
NOTE
Devices with 10GE ports must be running Fabric OS 6.4.1ltd or later to obtain the correct
TE port statistics (TX/RX).
discovered fabrics to the Selected table.
Historical performance data collection is enabled for all selected fabrics.
SAN Historical performance data
27
787