Enable Mld Snooping With-Proxy - Extreme Networks ExtremeWare XOS Command Reference Manual

Version 11.3

Hide thumbs Also See for ExtremeWare XOS:

Table of Contents

IPv6 Multicast Commands

enable mld snooping with-proxy

Enables the MLD snooping proxy. The default setting is enabled.

Syntax Description

This command has no arguments or variables.

Usage Guidelines

Enabling the proxy allows the switch to suppress the duplicate join requests on a group to forward to

the connected Layer 3 switch. The proxy also suppresses unnecessary MLD leave messages so that they

are forwarded only when the last member leaves the group.

This command can be used for troubleshooting purpose. It should be enabled for normal network

operation. The command does not alter the snooping setting.

The following command enables the MLD snooping proxy:

enable mld snooping with-proxy

This command was first available in ExtremeWare XOS 11.2.

Platform Availability

This command is available on all platforms.

ExtremeWare XOS 11.3 Command Reference

Do you have a question about the ExtremeWare XOS and is the answer not in the manual?

Extremeware xos 11.3