Disable Mld Snooping - Extreme Networks ExtremeWare XOS Command Reference Manual

disable mld snooping

disable mld snooping {forward-mcrouter-only | with-proxy | vlan <name>}
Description
Disables MLD snooping.
Syntax Description
forward-mcrouter-only
with-proxy
name
Default
MLD snooping and the with-proxy option are enabled by default, but forward-mcrouter-only option is
disabled by default.
Usage Guidelines
If a VLAN is specified, MLD snooping is disabled only on that VLAN, otherwise MLD snooping is
disabled on all VLANs.
If the switch is in the
forward-mcrouter-only
forward-mcrouter-only
not in the forward-mcrouter-mode, the command
has no effect.
The with-proxy option can be used for troubleshooting purpose. It should be enabled for normal
network operation.
Enabling the proxy allows the switch to suppress the duplicate join requests on a group to forward to
the connected Layer 3 switch. The proxy also suppresses unnecessary MLD done messages so that they
are forwarded only when the last member leaves the group.
Example
The following command disables MLD snooping on the VLAN accounting:
disable mld snooping accounting
History
This command was first available in ExtremeWare XOS 11.2.
ExtremeWare XOS 11.3 Command Reference
Specifies that the switch forwards all multicast traffic to the multicast router
only.
Disables the MLD snooping proxy.
Specifies a VLAN.
mode, then the command
changes the mode so that all multicast traffic is forwarded to any IP router. If
disable mld snooping forward-mcrouter-only
disable mld snooping
disable mld snooping
1599