Enable Ignore-Stp Vlan - Extreme Networks ExtremeWare Command Reference Manual

Version 7.0.0

Hide thumbs Also See for ExtremeWare:

Table of Contents

STP Commands

enable ignore-stp vlan

enable ignore-stp vlan <vlan name>

Configures the switch to ignore the STP protocol and not block traffic for the VLAN(s).

Syntax Description

Specifies a VLAN name.

Usage Guidelines

This command is useful when multiple VLANs share the same physical ports, but only some of the

VLANs require STP protection.

The following command enables the ignore-stp option on the VLAN accounting:

enable ignore-stp accounting

This command was first available in ExtremeWare 2.0.

Platform Availability

This command is available on all platforms.

ExtremeWare Software 7.0.0 Command Reference Guide

Extremeware 7.0.0