In normal operations, when the Summit WM Controller Availability feature is enabled, the local
Wireless APs are green, and the foreign Wireless APs are red. If the other Summit WM Controller fails,
and the foreign Wireless APs connect to the current Summit WM Controller, the display will show all
Wireless APs as green. If the Wireless APs are not connected they show up as red.
Viewing Statistics for Wireless APs
Two displays are snapshots of activity at that point in time on a selected Wireless AP:
Wired Ethernet Statistics by Altitude AP
●
Wireless Statistics by Altitude AP
●
The statistics displayed are those defined in the 802.11 MIB, in the IEEE 802.11 standard.
To view wired Ethernet statistics by Altitude AP:
1 From the main menu, click Reports & Displays. The Reports & Displays screen is displayed.
2 Click the Wired Ethernet Statistics by Altitude AP display option. The Wired Ethernet Statistics by
Altitude APs display opens in a new browser window.
3 In the Wired Ethernet Statistics by Altitude APs display, click a registered Wireless AP to display
its information.
Summit WM20 User Guide, Software Release 4.2
Viewing the Displays
187