Show Ip Igmp Snooping Interface - HP Bc1500 - BladeSystem - Blade PC Reference Manual
Blade switch
Hide thumbs
Also See for Bc1500 - BladeSystem - Blade PC:
- User manual (216 pages) ,
- Setup and installation manual (149 pages) ,
- Supplementary manual (45 pages)
Table of Contents
Advertisement
IGMP Snooping Commands
show ip igmp snooping interface
The show ip igmp snooping interface User EXEC mode command displays IGMP snooping
configuration.
Syntax
show ip igmp snooping interface vlan-id
Parameters
■
vlan-id — VLAN number.
Default Setting
This command has no default configuration.
Command Mode
User EXEC mode
Command Usage
There are no user guidelines for this command.
Example
The following command displays IGMP snooping information on VLAN 1000.
Console> show ip igmp snooping interface 1000
IGMP Snooping is globally enabled
IGMP Snooping is enabled on VLAN 1000
IGMP host timeout is 300 sec
IGMP Immediate leave is disabled. IGMP leave timeout is 10 sec
IGMP mrouter timeout is 200 sec
Automatic learning of multicast router ports is enabled
10-8
www.hp.com
HP PC Blade Switch CLI Reference Guide
Advertisement
Table of Contents
