Spanning-Tree Mst Priority - HP Bc1500 - BladeSystem - Blade PC Reference Manual

spanning-tree mst priority

The spanning-tree mst priority Global Configuration mode command configures the device
priority for the specified spanning-tree instance. To return to the default configuration, use the no
form of this command.
Syntax
spanning-tree mst
no spanning-tree mst instance-id priority
Parameters
■
instance-id — ID of the spanning -tree instance (Range: 1-16).
■
priority — Device priority for the specified spanning-tree instance
(Range: 0-61440 in multiples of 4096).
Default Setting
The default bridge priority for IEEE Spanning Tree Protocol (STP) is 32768.
Command Mode
Global Configuration mode
Command Usage
The device with the lowest priority is selected as the root of the spanning tree.
Example
The following command configures the spanning tree priority of instance 1 to 4096.
console (config) # spanning-tree mst 1 priority 4096
HP PC Blade Switch CLI Reference Guide
nstance-id priority priority
i
www.hp.com
Spanning-Tree Commands
22-15