Dot1X Guest-Vlan - HP Bc1500 - BladeSystem - Blade PC Reference Manual
Blade switch
Hide thumbs
Also See for Bc1500 - BladeSystem - Blade PC:
- User manual (216 pages) ,
- Setup and installation manual (149 pages) ,
- Supplementary manual (45 pages)
Table of Contents
Advertisement
dot1x guest-vlan
The dot1x guest-vlan Interface Configuration mode command defines a guest VLAN. To return
to the default configuration, use the no form of this command.
Syntax
dot1x guest-vlan
no dot1x guest-vlan
Parameters
There are no parameters for this command.
Default Setting
No VLAN is defined as a guest VLAN.
Command Mode
Interface Configuration (VLAN) mode
Command Usage
Use the dot1x guest-vlan enable Interface Configuration mode command to enable
unauthorized users on an interface to access the guest VLAN.
If the guest VLAN is defined and enabled, the port automatically joins the guest VLAN when the
port is unauthorized and leaves it when the port becomes authorized. To be able to join or leave
the guest VLAN, the port should not be a static member of the guest VLAN.
Example
The following command defines VLAN 2 as a guest VLAN.
Console#
Console# configure
Console(config)# vlan database
Console(config-vlan)# vlan 2
Console(config-vlan)# exit
Console(config)# interface vlan 2
Console(config-if)# dot1x guest-vlan
HP PC Blade Switch CLI Reference Guide
www.hp.com
802.1x Commands
2-21
Advertisement
Table of Contents
