ip default-gateway
The ip default-gateway Global Configuration mode command defines a default gateway. To
return to the default configuration, use the no form of this command.
Syntax
ip default-gateway ip-address
no ip default-gateway
Parameters
■
ip-address — Valid IP address of the default gateway.
Default Setting
No default gateway is defined.
Command Mode
Global Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following command defines default gateway 192.168.1.1.
Console(config)# ip default-gateway 192.168.1.1
HP PC Blade Switch CLI Reference Guide
www.hp.com
IP Addressing Commands
11-3