Snmp-Server Contact - HP Bc1500 - BladeSystem - Blade PC Reference Manual
Blade switch
Hide thumbs
Also See for Bc1500 - BladeSystem - Blade PC:
- User manual (216 pages) ,
- Setup and installation manual (149 pages) ,
- Supplementary manual (45 pages)
Table of Contents
Advertisement
snmp-server contact
The snmp-server contact Global Configuration mode command configures the system contact
(sysContact) string. To remove system contact information, use the no form of the command.
Syntax
snmp-server contact text
no snmp-server contact
Parameters
■
text — Specifies the string that describes system contact information.
(Range: 0-160 characters)
Default Setting
This command has no default configuration.
Command Mode
Global Configuration mode
Command Usage
Do not include spaces in the text string or place text that includes spaces inside quotation marks.
Example
The following command configures the system contact point called HP_Technical_Support.
Console(config)# snmp-server contact HP_Technical_Support
HP PC Blade Switch CLI Reference Guide
www.hp.com
SNMP Commands
21-15
Advertisement
Table of Contents
