Rmon Commands - HP Bc1500 - BladeSystem - Blade PC Reference Manual

RMON Commands

The following table describes significant fields shown in the example:
Field
Octets
Packets
Broadcast
Multicast
CRC Align
Errors
Collisions
Undersize Pkts
Oversize Pkts
Fragments
Jabbers
64 Octets
65 to 127
Octets
128 to 255
Octets
256 to 511
Octets
20-2
Description
The total number of octets of data (including those in bad packets) received
on the network (excluding framing bits but including FCS octets).
The total number of packets (including bad packets, broadcast packets, and
multicast packets) received.
The total number of good packets received and directed to the broadcast
address. This does not include multicast packets.
The total number of good packets received and directed to a multicast
address. This number does not include packets directed to the broadcast
address.
The total number of packets received with a length (excluding framing bits,
but including FCS octets) of between 64 and 1518 octets, inclusive, but with
either a bad Frame Check Sequence (FCS) with an integral number of octets
(FCS Error) or a bad FCS with a non-integral number of octets (Alignment
Error).
The best estimate of the total number of collisions on this Ethernet segment.
The total number of packets received less than 64 octets long (excluding
framing bits, but including FCS octets) and otherwise well formed.
The total number of packets received longer than 1518 octets (excluding
framing bits, but including FCS octets) and otherwise well formed.
The total number of packets received less than 64 octets in length (excluding
framing bits but including FCS octets) and either a bad Frame Check
Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS
with a non-integral number of octets (Alignment Error).
The total number of packets received longer than 1518 octets (excluding
framing bits, but including FCS octets), and either a bad Frame Check
Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS
with a non-integral number of octets (Alignment Error).
The total number of packets (including bad packets) received that are 64
octets in length (excluding framing bits but including FCS octets).
The total number of packets (including bad packets) received that are
between 65 and 127 octets in length inclusive (excluding framing bits but
including FCS octets).
The total number of packets (including bad packets) received that are
between 128 and 255 octets in length inclusive (excluding framing bits but
including FCS octets).
The total number of packets (including bad packets) received that are
between 256 and 511 octets in length inclusive (excluding framing bits but
including FCS octets).
www.hp.com HP PC Blade Switch CLI Reference Guide