Crypto Certificate Request - HP Bc1500 - BladeSystem - Blade PC Reference Manual

crypto certificate request

The crypto certificate request Privileged EXEC mode command generates and displays
certificate requests for HTTPS.
Syntax
crypto certificate number request [cn common- name ] [ou organization-unit] [or organization
[loc location] [st state] [cu country]
Parameters
■
number — Specifies the certificate number. (Range: 1-2)
■
common- name — Specifies the fully qualified URL or IP address of the device.
(Range: 1-64)
■
organization-unit — Specifies the organization-unit or department name. (Range: 1-64)
■
organization — Specifies the organization name. (Range: 1-64)
■
location — Specifies the location or city name. (Range: 1-64)
■
state — Specifies the state or province name. (Range: 1-64)
■
country — Specifies the country name. (Range: 1-2)
Default Setting
There is no default configuration for this command.
Command Mode
Privileged EXEC mode
Command Usage
Use this command to export a certificate request to a Certification Authority. The certificate
request is generated in Base64-encoded X.509 format.
Before generating a certificate request you must first generate a self-signed certificate using the
crypto certificate generate Global Configuration mode command. Be aware that you have to
reenter the certificate fields.
After receiving the certificate from the Certification Authority, use the crypto certificate import
Global Configuration mode command to import the certificate into the device. This certificate
replaces the self-signed certificate.
HP PC Blade Switch CLI Reference Guide www.hp.com
Web Server Commands
]
29-7