Password - HP Bc1500 - BladeSystem - Blade PC Reference Manual

AAA Commands

password

The password Line Configuration mode command specifies a password on a line. To remove the
password, use the no form of this command.
Syntax
password password [encrypted]
no password
Parameters
■
password — Password for this level (Range: 1-160 characters).
■
encrypted — Encrypted password to be entered, copied from another device configuration.
Default Setting
No password is defined.
Command Mode
Line Configuration mode
Command Usage
If a password is defined as encrypted, the required password length is 32 characters.
Example
The following command specifies password secret on a console.
Console(config)# line console
Console(config-line)# password secret
3-10 www.hp.com HP PC Blade Switch CLI Reference Guide